Due to the particularity of self-locking nylon cable ties (thin wall, the merchandise injection process is comparatively large), its mold, injection process, and materials are quite particular, and general new manufacturers need an extended groping process to supply qualified products. The self-locking nylon cable ties are designed with a non-return function (except for the live buckle type), which may only be tightened more and more tightly. There also are detachable cable ties (live buckle), so what are the raw materials for self-locking nylon cable ties? Let's take a glance at it next.
Due to the particularity of the self-locking nylon cable ties (thin wall, the product injection process is relatively large), its mold, injection process, and material are quite particular. So what is the phenomenon of wrong processing of self-locking nylon cable ties? Let's take a look.
Self-locking nylon cable ties are made of UL-approved nylon-66 (Nylon 66) material by injection molding, fire standing 94V-2, good acid resistance, erosion resistance, sequestration, not easy to progress, strong abidance. The operating temperature is-20 °C to 80 °C ( normal nylon 66). Self-locking nylon cable ties are extensively used in electronics manufactories, speeding TVs, computers, and other internal connecting lines, fixing the inner lines of lighting, motors, electronic toys, and other products fixing canvas channels of ministry and outfit, fixing string lines on vessels, Bikes can be packaged or whisked with other objects, and can also be used for speeding particulars similar as husbandry, gardening, crafts, etc. Self-locking nylon cable ties have the characteristics of the fast list, good sequestration, tone-locking fastening, and accessible use. So what's the injection molding process of self-locking nylon cable ties? Let's take a look at it next.
To ensure the quality and reliability of terminals blocks and prevent the occurrence of the above fatal failures, it is recommended to study and formulate corresponding screening technical requirements according to the technical conditions of the products, and carry out the following targeted failure prevention reliability inspections.
Terminal blocks are a kind of appurtenant product used to realize the electrical connection, which is divided into the order of connectors in the assiduity. With the adding degree of artificial robotization and the stricter and more precise conditions of artificial control, the quantum of terminals blocks is gradationally adding. With the development of electronics assiduity, the use of terminal blocks is adding, and there are more and more types. In addition to PCB board outstations, the most extensively used bones are tackle outstations, nut outstations, spring outstations, and so on. What are the product structure design and process adaptation of terminals blocks? Then are some answers.
With the beginning of my country's 3C certification system, the country has put forward higher requirements for the safety and electromagnetic compatibility of electrical products. The relevant standards are GB16836-2003 "General Requirements for the Safety Design of Measuring Relay Protection Devices", GB /T14598.3-1993 "Insulation Test of Electrical Relays", JB/T 9568-2000 "General Specifications for Power System Relays, Protections, and Automatic Devices", International Standard IEC60255-27 (CD: 2002) "Measuring Relays and Protection Devices" "Product Safety Requirements", in which the safety items involved in GB16836-2003 mainly include: mechanical structure, shell protection, insulation coordination, heat generation, the fire test, protection against electric shock, safety signs and safety instructions. What are the product requirements for terminals blocks? let's see.